Flower Coat Hook Pattern

After the  article “Paint the Flowers on the Wall” we have had some interest in the pattern to make one of these flower coat hooks.  I made a pattern and some instructions to cut out one of these flower hooks yourself you can download a pdf of the plans by clicking here or on the image below.

Remember to drill the center to 1/2 inch diameter and to glue and pound in a

3 1/2 inch shaker peg as seen in the photo below.

Add some hanging hooks to the back and you will have nice flower coat hook.

Featherboard Pattern

I needed a feather-board to guide some wood through my router so I drew up this quick feather-board pattern.  Click here for the full size pdf pattern or click on the picture of the pattern below.

I made my featherboard from some 1/2″ thick plastic I had purchased from a surplus pile at a local hardware store.

Toy Saw Pattern and Instructions

Even a kids toolbox is not complete without a good saw.  For filling out that toddler toolbox you can download our pattern and cut one on yourself.

This toy saw can be made from a scrap of 1/4″ plywood or any other 1/4″ thick material you choose.  It consists of three pieces easily cut on a scroll saw.  Click here or on the picture below to downoad a free pdf of the pattern with instructions and then you can follow along with the pictures below to see how I made mine.

You can see in the picture below I cut the three parts of the saw from an 8″ X 10″ piece of scrap 1/4″ plywood.

I then glued and clamped the boards together.  I used Gorilla Wood glue, but any polyurethane wood glue should work fine.  Make sure to remember to use a piece of scrap material under the clamps as to not dent the wood.

Finally I hand sanded the saw to 220 grit.  You can finish the saw with the child safe finish of your choice or you can leave the toy unfinished.

Thanks for viewing this project.  Please leave any questions, problems and comments you have below.

Spoon Pattern

A friend mentioned he needed a pattern to cut out a wooden spoon, so I quickly made one up.  You could use this for a real cooking spoon or you could scale it down and use it for a play spoon.

Click here to download or click on picture

Doll High Chair Plans are Released

For Christmas this year I am building my daughter a high chair for her dolls.  I just finished the design and am putting the plans I created out right away.  The plans are free to download click here to download a pdf of the doll high chair plans or click on the picture of the print below.

Next Page »